Rainbow Band Bracelet

Project A047

Skill Level: Beginner

You will need:

REQUIREMENTS

  • Creative Mates Rainbow Bands
  • 1 loom
  • 1 hook
  • 1 S-clasp
INSTRUCTIONS

Step 1: Start from the side with pin lips facing towards you, and lay the first rubber band.

Step 2: Lay the second rubber band in a zig-zag pattern.

Step 3: Lay the rubber bands to the end in a zig-zag pattern. 

Step 4: Turn the loom around so pin lips are facing away from you. Then use the hook to pick the second rubber band.

Step 5: Pull it up from the pin then loop it onto the forward pin.

Step 6: Pick the third rubber band. 

Step 7: Loop it onto the forward pin.

Step 8: Repeat steps 6 and 7 to the other side of the loom. 

Step 9: Remove the band from the loom. 

Step 10: Secure the two ends.

Step 11: Pass the rubber band through the double loop.

Step 12: Secure the end with S-clasp.

Step 13: Secure the other end with S-clasp.

Step 14: Fasten and your Rainbow Band is ready to wear! 

Rainbow Band Bracelet

More Views

Instructions

The information contained within this project sheet is presented in good faith, but no warranty is given, nor results guaranteed.

Product quantities and selections may vary at each Lincraft store. Products are subject to availability and not all ranges are available in all stores.

Before making a special journey please contact the store direct to check that they have your required product in stock. Lincraft disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.

Since we have no control over physical conditions surrounding the application of the information herein contained, Lincraft disclaims any liability for untoward results.

"Project time and recommended skill level are estimations only and will vary between individuals".

Related Product

  • $8.95 Delivery Australia Wide*