Pearl Necklace & Bracelets #2750

Pearl Necklace & Bracelets
  • Ribtex Round Crimpers, 2mm Silver- 100pc
    Ribtex Round Crimpers, 2mm Silver- 100pc
    QTY
    $4.00
    SKU# 22112545-02620
  • Ribtex Head Pins, Black- 15pc
    Ribtex Head Pins, Black- 15pc
    QTY
    $2.99
    SKU# 22020758-02620
  • Ribtex Lobster Clasps, 11mm Silver- 14pc
    Ribtex Lobster Clasps, 11mm Silver- 14pc
    QTY
    $3.50
    SKU# 22163707-02620
  • Sullivans Tiger Tail Wire, Silver- 0.45mm x 3m
    Sullivans Tiger Tail Wire, Silver- 0.45mm x 3m
    QTY
    $3.49
    SKU# 22321534-02073
SKU# Pearl_Necklace_&_Bracelets
In stock
: JF159 Ribtex tiger tail silver 5m JF762 Ribtex clasp toggle floral 25mmdk slv 2 sets JF178 Ribtex crimpers round 2mm ant silver 100pcs JF189 Ribtex head pins 65mm antique silver 15pcs JF847 Ribtex head pin dec style 3 55mm dk slv 8pc JF238 Ribtex jump rings 7mm antique silver 40pcs JF455 Ribtex spacer 3 hole oblong 25x8mm slv 6pcs JF445 Ribtex feature flower 29mm round silver 1pc JF453 Ribtex charm 17mm leaf silver 20pcs GPL204 Ribtex bead glass pearls 6mm white 81pcs GPL304 Ribtex bead glass pearls 8mm white 60pcs GPL404 Ribtex bead glass pearls 10mm white 30pcs GPL504 Ribtex bead glass pearls 12mm white 24pcs GPL107 Ribtex bead glass pearls 4mm black 105pcs GPL207 Ribtex bead glass pearls 6mm black 81pcs GPL307 Ribtex bead glass pearls 8mm black 60pcs GPL407 Ribtex bead glass pearls 10mm black 30pcs Ribtex tools pliers round nose 1pc Tools pliers cutter 1pc Crimper

step 1 Cut three lengths of tiger tail approximately 1m each. step 2 Line up the three ends evenly together and slide on three crimpers. step 3 Thread the three threads through the hole of the flower piece of the toggle and back through the three crimpers to form a loop, ensuring the loop is not too large. Crimp the crimpers and cut off excess tiger tail. step 4 Thread three 8mm black glass pearls, onto the three tiger tail lengths, tucking the ends into the first glass pearl to hide them. step 5 Starting with the inside length, thread the following sequence of beads; Six 6mm glass pearls white, one 8mm glass pearl white, one 10mm glass pearl white, one 8mm glass pearl white, four 6mm glass pearls white, one 8mm glass pearl black, one 10mm glass pearl black, one 8mm glass pearl black, four 6mm glass pearls white, one 12mm glass pearl white, one 6mm glass pearl white, one 12mm glass pearl white, four 6mm glass pearls white, one 8mm glass pearl white, five 6mm glass pearls white, one 10mm glass pearl white, three 8mm glass pearls white , one 12mm glass pearl white, one 10mm glass pearls white, two 10mm glass pearls black, four 6mm glass pearls black, one 8mm glass pearl black, one 6mm glass pearl black, one 8mm glass pearl white, one 12mm glass pearl white, five 6mm glass pearl white. thread through both holes on the right side (facing you) of the oblong spacer and thread one 8mm glass pearl black, two 6mm glass pearls black and two 4mm glass pearls black. step 6 Using the middle length, thread the following sequence; one 4mm glass pearl black then the following of all white glass pearls; five 6mm, three 8mm, one 6mm, one 12mm, one 6mm, one 8mm, ten 10mm, ten 8mm, ten 6mm, one 12mm, eight 6mm, and three 8mm. Thread through both middle holes of the oblong spacer and thread one 8mm glass pearl black, two 6mm glass pearls black and three 4mm glass pearls black. step 7 Using the outside length, thread the following sequence using black glass pearls; 28 x 4mm, one 6mm, three 10mm, seven 6mm, one jump ring, two 6mm, one jump ring, two 6mm, one 8mm, one jump ring and two 8mm repeated six times, ten 10mm, five 8mm and three 6mm. Thread through both the left hand holes of the oblong spacer and thread one 8mm glass pearl black, two 6mm glass pearls black and two 4mm glass pearls black. step 8 Join all three threads together and thread through one 8mm, one 10mm and one 8mm black glass pearls. The side beaded threads above the Oblong Space should sit behind the middle beaded thread. Finally thread forty nine 6mm black glass pearls on the three threads to create one strand. step 9 Slide on three crimpers onto the three threads, pass through the hole of the bar piece of the toggle and back through the three crimpers to create a small loop as close as possible to the pearls. Crimp the crimpers and trim off the excess tiger tail as close to the crimpers as possible. step 10 Using the excess black and white pearls, thread onto either a head pin or decorative head pin, trim off some of the excess pin leaving enough to create a loop. As you create the loop hook it onto the jump rings on the outside black pearl strand at the bottom. step 11 Attach the flower feature and leaf charms with a jump ring to one of the eight jump rings. Using some stretch thread or excess tiger tail creates a bracelet using the left over pearls. Bracelet 1 Instructions step 1 Cut a piece of tiger tail approximate 30cm long. s tep 2 Thread two crimpers onto the end and then through the hole of the flower piece of the toggle creating a loop. step 3 Thread the tiger tail back through the crimpers and crimp. step 4 Thread fifteen 12mm glass pearls onto the tiger tail. step 5 Thread two crimpers onto the ends and then thread the ends through the hole of the bar piece of the toggle creating a loop. step 6 Thread the tiger tail back through the crimpers and crimp. Bracelet 2 Instructions step 1 Create a pattern using the left over pearls from the necklace. It is easier to lay out your pattern flat first and check that the length of the bracelet measures approximately 22cms. Our sample pattern has two rows of white and a middle row of black comprising of three 8mm Pearls, one 10mm Pearl and three 8mm Pearls in each section. step 2 Cut three pieces of stretch thread approximately 30cm long. step 3 Thread one piece of stretch thread through the top hole of the oblong spacer and follow with 7 pearls. step 4 Thread through a second oblong spacer and follow with 7 pearls. step 5 Thread through a third oblong spaced and follow with 7 pearls. step 6 To finish the row, thread back through the first oblong spacer and tie off your stretch thread tightly. Repeat this process for the other two rows. Hint It is easier to have the oblong spacers inside out to thread and tie off the stretch thread.
Add my Review

Write Your Review

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars
    • Quality
    • Price
    • Value

* Required Fields

Be the first to review this product